postgresql - Sending/Receiving Bulk SMS via USB Modem and gnokii-smsd-pgsql -


i'm trying send , receive bulk smss via standard gsm usb modem using gnokii-smsd-pgsql on debain squeeze 6.0.3 64-bit.

i'm following instructions following site: http://thelogbox.com/send-receive-sms-messages-usb-modem-linux/

i had postgres installed on machine, used gnokii-smsd-pgsql.

shalin@developer-hp:/dev$ sudo apt-get install gnokii-smsd-pgsql  reading package lists... done building dependency tree        reading state information... done gnokii-smsd-pgsql newest version. 0 upgraded, 0 newly installed, 0 remove , 378 not upgraded. shalin@developer-hp:/dev$ sudo apt-get install gnokii-smsd-pgsql  reading package lists... done building dependency tree        reading state information... done gnokii-smsd-pgsql newest version. 0 upgraded, 0 newly installed, 0 remove , 378 not upgraded.

when try find port modem connected on, get:

shalin@developer-hp:~$ sudo lsusb  [sudo] password shalin:  bus 005 device 001: id 1d6b:0001 linux foundation 1.1 root hub bus 004 device 002: id 1a86:7523 qinheng electronics hl-340 usb-serial adapter bus 004 device 001: id 1d6b:0001 linux foundation 1.1 root hub bus 003 device 003: id 0461:0010 primax electronics, ltd  bus 003 device 002: id 093a:2510 pixart imaging, inc. optical mouse bus 003 device 001: id 1d6b:0001 linux foundation 1.1 root hub bus 002 device 001: id 1d6b:0001 linux foundation 1.1 root hub bus 001 device 007: id 19d2:0154 onda communication s.p.a.  bus 001 device 006: id 058f:6366 alcor micro corp. multi flash reader bus 001 device 002: id 04e8:3426 samsung electronics co., ltd scx-4500 laser printer bus 001 device 001: id 1d6b:0002 linux foundation 2.0 root hub shalin@developer-hp:~$

the device is: onda communication s.p.a.

shalin@developer-hp:~$ sudo dmesg | grep usb [    0.471217] ehci_hcd: usb 2.0 'enhanced' host controller (ehci) driver [    0.471311] ehci_hcd 0000:00:1d.7: new usb bus registered, assigned bus number 1 [    0.475052] uhci_hcd: usb universal host controller interface driver [    0.487912] ehci_hcd 0000:00:1d.7: usb 2.0 started, ehci 1.00 [    0.487956] usb usb1: new usb device found, idvendor=1d6b, idproduct=0002 [    0.487960] usb usb1: new usb device strings: mfr=3, product=2, serialnumber=1 [    0.488073] hub 1-0:1.0: usb hub found [    0.488148] uhci_hcd 0000:00:1d.0: new usb bus registered, assigned bus number 2 [    0.488195] usb usb2: new usb device found, idvendor=1d6b, idproduct=0001 [    0.488197] usb usb2: new usb device strings: mfr=3, product=2, serialnumber=1 [    0.488257] hub 2-0:1.0: usb hub found [    0.489428] uhci_hcd 0000:00:1d.1: new usb bus registered, assigned bus number 3 [    0.489495] usb usb3: new usb device found, idvendor=1d6b, idproduct=0001 [    0.489497] usb usb3: new usb device strings: mfr=3, product=2, serialnumber=1 [    0.489559] hub 3-0:1.0: usb hub found [    0.490862] uhci_hcd 0000:00:1d.2: new usb bus registered, assigned bus number 4 [    0.490916] usb usb4: new usb device found, idvendor=1d6b, idproduct=0001 [    0.490918] usb usb4: new usb device strings: mfr=3, product=2, serialnumber=1 [    0.490981] hub 4-0:1.0: usb hub found [    0.491031] uhci_hcd 0000:00:1d.3: new usb bus registered, assigned bus number 5 [    0.491082] usb usb5: new usb device found, idvendor=1d6b, idproduct=0001 [    0.491084] usb usb5: new usb device strings: mfr=3, product=2, serialnumber=1 [    0.491141] hub 5-0:1.0: usb hub found [    0.803706] usb 1-1: new high speed usb device using ehci_hcd , address 2 [    0.937425] usb 1-1: new usb device found, idvendor=04e8, idproduct=3426 [    0.937431] usb 1-1: new usb device strings: mfr=1, product=2, serialnumber=3 [    1.268016] usb 1-7: new high speed usb device using ehci_hcd , address 6 [    1.401680] usb 1-7: new usb device found, idvendor=058f, idproduct=6366 [    1.401683] usb 1-7: new usb device strings: mfr=1, product=2, serialnumber=3 [    1.406441] initializing usb mass storage driver... [    1.406635] scsi4 : scsi emulation usb mass storage devices [    1.406703] usb mass storage support registered. [    1.640040] usb 4-2: new full speed usb device using uhci_hcd , address 2 [    1.803952] usb 4-2: new usb device found, idvendor=1a86, idproduct=7523 [    1.803957] usb 4-2: new usb device strings: mfr=0, product=2, serialnumber=0 [    1.803961] usb 4-2: product: usb2.0-ser! [    2.044018] usb 3-1: new low speed usb device using uhci_hcd , address 2 [    2.218546] usb 3-1: new usb device found, idvendor=093a, idproduct=2510 [    2.218552] usb 3-1: new usb device strings: mfr=1, product=2, serialnumber=0 [    2.218557] usb 3-1: product: usb optical mouse [    2.524518] usb 3-2: new low speed usb device using uhci_hcd , address 3 [    2.701552] usb 3-2: new usb device found, idvendor=0461, idproduct=0010 [    2.701558] usb 3-2: new usb device strings: mfr=1, product=2, serialnumber=0 [    2.701562] usb 3-2: product: usb keyboard [    3.125256] usblp0: usb bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04e8 pid 0x3426 [    3.140601] usb serial support registered generic [    3.140639] usbserial: usb serial driver core [    3.163516] usb serial support registered ch341-uart [    3.176282] usb 4-2: ch341-uart converter attached ttyusb0 [    3.476799] input: pixart usb optical mouse /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4 [    3.476877] generic-usb 0003:093a:2510.0001: input,hidraw0: usb hid v1.11 mouse [pixart usb optical mouse] on usb-0000:00:1d.1-1/input0 [    3.491755] input: novatek usb keyboard /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5 [    3.491808] generic-usb 0003:0461:0010.0002: input,hidraw1: usb hid v1.10 keyboard [novatek usb keyboard] on usb-0000:00:1d.1-2/input0 [    3.525651] input: novatek usb keyboard /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input6 [    3.525714] generic-usb 0003:0461:0010.0003: input,hidraw2: usb hid v1.10 device [novatek usb keyboard] on usb-0000:00:1d.1-2/input1 [    3.525736] usbhid: v2.6:usb hid core driver [ 1636.760031] usb 1-5: new high speed usb device using ehci_hcd , address 7 [ 1636.893751] usb 1-5: new usb device found, idvendor=19d2, idproduct=0154 [ 1636.893756] usb 1-5: new usb device strings: mfr=3, product=2, serialnumber=4 [ 1636.896329] scsi5 : scsi emulation usb mass storage devices [ 1641.897006] scsi 5:0:0:0: cd-rom            zte      usb scsi cd-rom  2.31 pq: 0 ansi: 2 shalin@developer-hp:~$

i should state haven't been on linux systems in while , beginning suspect main reason why have no clue /dev/ folder modem mapped because i'm on older version of debian.

i created , edited config file per instruction. file located here: 

/home/shalin/.config/

edited as:

port = /dev/tty0

and:

model = @

finally, when try test using:

sudo gnokii --identify

gnokii isn't listed in possible command on prompt. tab goes gnome, don't think gnokii installed.

as can see, have no idea whats wrong, , should doing. appreciated.

regards, shalin.

  1. i believe haven't installed gnokii. smsd not gnokii. apt-get install gnokii , try running gnokii --identify command line

  2. also have make sure port exact port modem connected to. when plugged modem in , did dmesg didn't list luckily had 6 usb ports tried of them until found right one. line in config file is:

port = /dev/ttyusb3

the number @ end vary depending on port.

3.http://rolfblijleven.blogspot.nl/2013/01/raspberry-pi-as-sms-gateway.html


Comments

Post a Comment

Popular posts from this blog

assembly - 8086 TASM: Illegal Indexing Mode -

this question has answer here: illegal use of register in indirect addressing 1 answer i writing 8086 assembly program needs compile through tasm v3.1. running error can not seem fix. my data segment has following set purposes of keyboard input: parao label byte maxo db 5 acto db ? datao db 5 dup('$') what trying first character entered, first byte of datao: lea dx, datao mov bl, [dx] however, when attempt compile, error: **error** h5.asm(152) illegal indexing mode line 152 "mov bl, [dx]" any appreciated. if matters, running tasm through dosbox (my laptop running 64-bit win7) google hasn't come helpful answers. can post entirety of code if necessary. pretty sure reason can't use dx register pointer. try instead using [si], [di] or [bx]: lea bx, data0 mov al, [bx]
Read more

Java, LWJGL, OpenGL 1.1, decoding BufferedImage to Bytebuffer and binding to OpenGL across classes -

i've been attempting solve problem without luck. have 4 classes, main class, object class, sprite class , image loader class. i'm attempting load png using image loader , using method found here: http://www.java-gaming.org/topics/bufferedimage-to-lwjgl-texture/25516/msg/220280/view.html#msg220280 convert bytebuffer, , bind opengl. the image in it's own seperate resource folder. should being drawn this: ( http://i.imgur.com/j8gbu4c.png ) (32x32), i'm seeing white box has dimensions of image, not actual texture. if has idea of go fix i'd appreciate it. i'm new opengl , looking avoid using external library in order learn how actual code works. thanks. updated! to following, implemented suggestion provided vallentin, quad taking color of first pixel in image. i've attempted implementing image loader provided c.s here . i'm receiving error: javax.imageio.iioexception: error reading png image data @ com.sun.imageio.plugins.png.pngimagereader.r...
Read more

javascript - addthis share facebook and google+ url -

i attempting use addthis create simple url shares whichever current page user on when click share button. of right now, have twitter working. when user clicks, able see url populated in tweet box. when user clicks facebook or google+, url doesn't seem show in share box. <ul class="addthis_toolbox addthis_default_style "> <li><a class="addthis_button_facebook"><img src="/img/facebook-social.png" width="20" height="20" border="0" alt="share" /></a></li> <li><a class="addthis_button_twitter"><img src="/img/twitter-social.png" width="20" height="20" border="0" alt="share" /></a></li> <li><a class="addthis_button_google_plusone_share"><img src="/img/google-social.png" width="20" height="20" border="0" alt="s...
Read more